Morgan Spas or Morgan Hot Tubs have the greatest number and variety of Spa Jets in the industry – for its hot tubs. The interesting thing about Morgan Hot Tubs is the company allow you to customize your hot tubs to suit your needs, whether you use morgan hot tubs for pleasure or for hydrotherapy. But just like any other hot tubs, morgan hot tubs also need some tips to fix every problem, and of course to maximize the functionality of the morgan hot tubs.
And here are some tips and basic steps that will be useful for you to quickly diagnose any problems facing your hot tubs and take corrective action that will return you to the hot tubs normal conditions.
Tips How to Maintain Your Morgan Hot Tubs
Step 1: Make sure you morgan hot tubs is receiving power. Make sure also that the breaker is on and the GFCI outlet does not need to reset.
Step 2: Check the water level of your hot tubs. If the water level below the filter, add water immediately. Filtering, Pumping water through the jets, and heating can not function properly if the water level is low or insufficient.
Step 3: Clean up your hot tub filters regularly. Dirty hot tub filter that will restrict water flow and prevent water cleaning process.
Step 4: Unclog the discharge and suction lines. Clogs can prevent water from flowing through your spa, thus reducing the effectiveness of its internal parts.
Step 5: You can open the valve to ensure the amount of water coming out of the jet maximum. You also may need to bleed air from the pump. Open the bleeder valve near the filter until the water out.
Step 6: Review the control panel. Low hot water may require you to raise the temperature of the spa, change the mode of “Economy” to “Standard” or change other settings.
Tips & Warnings
• If you can not fix the problem your hot tub even if you have followed the basic diagnostic steps, it helps you contact your Morgan Spa.
• If you see a flashing triangle on the control panel of your hot tubs, it indicates that the water temperature is too hot. Morgan hot tubs you can probably just do an internal steps to fix some problems, although you may need the help of Morgan.
Source: eHow.com.
